Airplus Earpods

First lets try to reset the ear buds to the factory setting. We can do this by holding both ear bud buttons for 6-8 seconds After you do this we can start to pair the buds. On the right Ear bud press and hold the button until the led light starts to flash red and blue. approx. 6-8 seconds once you see the flashing go to your device and turn it on in the blue tooth section select air plus it should then show connected now go ahead and pair the left ear bud to the right ear bud by pressing t...

The charging amperage is controlled by the cable quality, so as long as you are using the charging cable that is provided with the Airplus earpods or a certified lighting cable the current is regulated. The Battery Life specs: For earphone: 1. standby time : about 80 hours 2. music play time: about 80 mins ( Max volume) 3. talk time: about 2.0 hours 4. charging time: 60 mins For charging case: 1. charging time: about 120 mins 2. when charging full, can be charged 3-5 times.

* * To Answer a Call * Press the Multifunction button of the Right earpod once Short * To end a Call * Press the Multifunction button of the Right earpod once short. Voice Response Tone “CALL ENDED” * To reject a Call * Press the Multifunction button of the Right earpod for 1 second. Voice Response Tone “CALL REJECTED” * To redial a Call * Press the Multifunction button of the Right earpod twice. Voice Response Tone “REDIALING” ...

* Dual Earpod Mode – Press and hold the multifunction button on the Right earpod for 3 seconds. Release when the red indicator light is on and the voice prompt responds “POWER OFF” * Single Earpod Mode - Press and hold the multifunction button of each earpod separately for 3 seconds. Release when the red indicator light is on and the voice prompt responds “POWER OFF” * The Battery status of the earpods is visible on connected devices when it is running out of power; the headset will remind y...

- - Press and hold the multifunction button for 6 seconds of the Left or Right (Not functioning) earpod and release when the red and blue light flash alternately. - Enable your phone’s Bluetooth Pairing function and search for the ‘Air Plus” to pair and connect

When the Airplus earpods are turned on, the Left and Right earpods will automatically connect to each other and the voice prompt will respond with “Connected”. The indicator lights of the right earpod will flash alternately in blue and red. While the indicator light of the left earpod will flash slowly. * * Enable the Bluetooth Pairing mode on your Phone or Tablet. Tap on “Airplus” to connect to the Airplus Earpods. NOTE: IF you see 2 Airplus entries in available devices then the...

* Press and hold the multi-function button on BOTH Left and Right earpods for 3 seconds at the same time and release when the earpods flash blue and voice prompt says “Power On”

* * Turn the earpods off using the multifunction button on each of the earpods. * Put the earpods in the charging case correctly. If you put the earpods in the charging case incorrectly, the case will not close. * The charging indicator light on the earpods will turn red while the earpods are charging * The charging indicator light on the earpods will turn OFF when the earpods are fully charged.

* * Connect the charge cable to the Lighting interface on the charge case. * Plug the usb connector of the cable into a USB power source * The indicator light will show red while the charging case is charging. Depending on the power delivered to the charging case, the charging case will take approximately 2 hours or more to completely charge. * The indicator light will go solid blue, then blink, then turn off when the case is fully charged.